Cable & Wireless CWD2601 DECT Telephone
Additional features
Helpline 0870 241 3201
58
Registering a new handset
This function allows you to register a handset with a base
station. Up to five handsets can be registered to a base
station and each handset can be registered to up to 4 base
units.
Each handset that registers can select the base number for
the base it is about to register with so that it can be
identified at the Base Selection setting.
Press
Menu
.
Use
Scroll
to scroll through the menu until SYSTEM is
displayed.
Press
OK
.
"
Note: Initially this procedure is not required
since the handset supplied in this system is
already registered to the base supplied.
However, this procedure is required if you add a
further handset to the system. It would be
required for the existing handset if you
inadvertently de-register it.
"
Note: Before beginning a registration procedure
ensure the new handset is fully charged, and
position the base unit and new handset in front
of you.
R
MENU
OK
Use
Scroll
to scroll through the menu until REGISTER is
displayed.
Press
OK
.
The LCD displays BS 1 2 3 4. (Base unit 1 to Base unit 4)
Use the
Numeric
keys to enter the number of the base
unit you wish to register using the numeric keypad on the
handset.
The handset displays PIN?
Use the
Numeric
keys to enter the PIN number of the base
unit (default is 0000).
Press and hold the
Find
handset
button on the base unit
until you hear two beeps.
Press
OK
The handset displays SEARCH BS X while it searches for the
base unit (where X is the number of the base you are
registering to).
Once a connection has been made, the handset name and
number appears on the Display. The handset number is the
next available number if the number of handsets already
registered with the base is less than 5.
The name is the name you provide, see Naming the Handset
on page 5
3
. The handset default name is CWD2601.
OK
OK
CWD2600 Additional features.fm Page 58 Thursday, May 15, 2003 11:53 PM
