- 18 -
Figure 6-5 IO testing interface
[JQ1], [JQ2], [JQ3], [JQ4], [JQ5], [JQ6], [JQ7], [JQ8]: Click the button, the font of the button will turn
red, and the corresponding light on the circuit board will light up. The corresponding lights of JQ1~JQ8
are M01~M08 on the circuit board, and their positions are shown in Figure 6-6.
[Round-trip cylinder alignment signal]: It indicates the mid-position signal of the round-trip cylinder.
Green indicates that the cylinder is not in the mid-position, and red indicates that the cylinder is in
the mid-position.
[Round-trip cylinder top signal]:
It indicates the signal of the top position of the round-trip cylinder.
The green indicates that the cylinder is not at the top position, and the red indicates that the cylinder
is at the top position.
[Round-trip cylinder bottom signal]: It indicates the signal of the bottom position of the round-trip
cylinder. The green indicates that the cylinder is not at the bottom position, and the red indicates
that the cylinder is at the bottom position.
[Return]: Click this button to return to the [Help & Settings] interface.
