- 4 -
4. The mold size of the roller compactor: 300×300mm, 300×400mm, 305×300mm, 305×400mm.
Mold thickness: 40-120 mm, can be made according to user requirements, suitable for the use of
the wheel tracking apparatus, and can automatically make specimen at one time according to the
preset height or density.
5. The maximum compaction load is 55KN, which is equivalent to the largest static roller on site.
6. Through the touch screen, the operator can set the loading pressure, vibration frequency and
round-trip times.
7. Simulate on-site vibration rolling, and the frequency can be adjusted.
8. Safety protection door. When any one of the three protective doors is opened, the equipment will
be cut off gas and power to protect the safety of the operator and prevent misoperation.
9. The specimens can be used for rutting test, sawn into beam shape for bending test, cut into
column or cored for indirect tensile and residual strain test.
10. Easy to insert and remove the mold.
Structure
Control panel
The equipment control panel (as shown in the figure) includes an LCD touch screen, a power indicator,
and an emergency stop switch.
