- 19 -
Figure 6-6 M01~M08 on the circuit board
Signal testing interface
In the [Help & Settings] interface shown in Figure 6-4, click the "Signal Testing" button, and the
instrument will enter the [Signal Testing] interface, as shown in Figure 6-7.
NOTE
This interface is mainly used for engineers to repair and test, and does not
need to be mastered by the customer.
[Pressure sensor voltage (V)]: Display the current feedback voltage of the electric proportional valve;
[Current pressure (kN)]: Display the pressure value generated by the current pressurized cylinder
work;
[Air source pressure sensor (V)]: Display the voltage of the air source pressure sensor;
[Air source pressure (MPa)]: Display the current pressure of the total air source received by the
instrument;
[Current Round-trip times]: Display the number of reciprocating processes of the current round-trip
