BYD e6A Owner'S Manual Download Page 27

Page: 27 / 195

BYD e6A AUTO Owner's Manual

Operation of Instruments and Controllers 1-9

If an indicator comes on or the buzzer buzzes

What to do

(g)

Please drive the car to a specified service station, and park the car to let the power motor

cool down. Please contact BYD staff in event of frequent occurrence.

(h)

Please drive the car to a specified service station; Please contact BYD staff for inspection.

(i)

Please drive the car to a specified service station if such a fault is detected; check whether

the coolant is sufficient and park the car to let the power motor cool down. Please contact

BYD staff in event of frequent occurrence.

(j)

Please drive the car to a specified service station; please contact BYD staff.

(k)

Please send the car to a specified service station; please contact BYD staff.

(l)

Please drive the car to a specified service station; Please contact BYD staff for inspection.

(m)

The power battery must be charged.

(n)

The vehicle is ready to drive; pay attention to the surrounding conditions.

(o)

Turn on the airbag for the front passenger seat if that seat is occupied by an adult.

Summary of Contents for e6A




































































































































































































Search results

Summary of Contents for e6A

Reviews:

Related manuals for e6A

Brands by name

Popular brands

BYD e6A, Owner'S Manual

Search results

Summary of Contents for e6A

Reviews:

Related manuals for e6A

Brands by name

Popular brands