BYD e6A Owner'S Manual Download Page 26

Page: 26 / 195

BYD e6A AUTO Owner's Manual

1-8 Operation of Instruments and Controllers

Service Reminder Indicators & Warning Buzzers

If an indicator comes on or the buzzer buzzes

What to do

(a)

If the parking brake is not applied, please stop the car immediately and contact a BYD

authorized service station.

(b)

(Indicator and buzzer)

Fasten the driver's safety belt.

(c)

Send the car to a specified service station. Please contact a BYD authorized service

station.

(d)

Send the car to a specified service station. If the braking system warning light also

illuminates, please contact a BYD authorized service station.

(e)

Close all doors.

(f)

Contact a BYD authorized service station.

Summary of Contents for e6A




































































































































































































Search results

Summary of Contents for e6A

Reviews:

Related manuals for e6A

Brands by name

Popular brands

BYD e6A, Owner'S Manual

Search results

Summary of Contents for e6A

Reviews:

Related manuals for e6A

Brands by name

Popular brands