BYD e6A Owner'S Manual Download Page 139

Page: 139 / 195

BYD e6A AUTO Owner's Manual

Emergency Treatment 3-7

Jack Positioning

d. Place the jack under the proper lifting point.

Make sure that the jack is placed on flat and

solid ground.

Lift Up Vehicle

e. Make sure nobody is in the car, and lift up

the car to a height that allows installation of

spare tire.

Please notice that it needs larger clearance to

install the spare tire than remove the flat tire.

To lift up the car, please insert the jack

handle into the jack (loose joint) and rotate it

clockwise. When the jack touches the car and

starts lifting, please check again if the jack is

at the right position.

Tips

When the car is supported completely by

jack, no one is allowed to stay under the

car.

Replace Wheels

Summary of Contents for e6A




































































































































































































Search results

Summary of Contents for e6A

Reviews:

Related manuals for e6A

Brands by name

Popular brands

BYD e6A, Owner'S Manual

Search results

Summary of Contents for e6A

Reviews:

Related manuals for e6A

Brands by name

Popular brands