BYD e6A Owner'S Manual Download Page 107

Page: 107 / 195

BYD e6A AUTO Owner's Manual

Air Conditioning System 1-89

The air filter is located behind the lower

protector RH.

The air filter may be clogged after an

extended period of operation time. If the air

flow from air conditioner decreases suddenly,

or the window glass fogs easily during

external air recirculation air suction mode,

replace the air filter.

To maintain the efficiency of air conditioner,

you must check and replace air filter

according to the maintenance program. (refer

to "BYD Maintenance Program")

Remove the instrument panel lower

protector RH (9 clamps used to assembly

lower protector RH and instrument panel).

b. Take out the filter box from the outlet of

filter as shown in the figure.

c. Remove the strainer from the filter box

d. Check the surface of the filter. Use

compressed air to blow common dust
against the opposite side. Do not wash the

filter in water or apply grease to it. If it is
dirty, replace with a new one.

Summary of Contents for e6A




































































































































































































Search results

Summary of Contents for e6A

Reviews:

Related manuals for e6A

Brands by name

Popular brands

BYD e6A, Owner'S Manual

Search results

Summary of Contents for e6A

Reviews:

Related manuals for e6A

Brands by name

Popular brands