BYD e6A, Owner'S Manual

Page: 48 / 195

BYD e6A AUTO Owner's Manual
1-30 Doors and Keys
Disable Anti-theft System
You can use the following means to disable
anti-theft alarm:

Unlock doors with remote control.

Unlock doors with microswitch.
Starting the vehicle
Before starting the vehicle
a. Check the environment around the car
before getting in.
b. Adjust seat position, seatback angle,
seat cushion height, head protection
device height, steering wheel angle and
height.
c. Adjust interior and exterior rear-view
mirror.
d. Make sure all doors are closed.
e. Fasten seat belts.
How to Start the Electric Vehicle
(a) Before Starting
a. Place the gearshift handle at "P"
position.
b. Shut down all unwanted lights and
electrical devices.
c. Release the parking brake.
d. Depress the brake pedal completely until
driving away.
NOTE

Wait a few seconds after starting; the
vehicle should not be operated until
the OK light comes on.

If the OK light does not come on after
several starting attempts, please note
any fault indicators on the
combination instrument. Contact a
BYD authorized service station if
necessary.
(b) Start motor
Button Starting Function
To start the electric vehicle, press the
"ENGINE START STOP" switch while the
intelligent key is inside the vehicle. The OK
light will come on when the vehicle has been
successfully started.
Before starting the motor, you must always
follow instructions in "(a) Before Starting
Motor".
Normal Starting Steps
The motor can be started only when an
intelligent key is in the car.
The green indicator on the "ENGINE START
STOP" switch will turn green when the brake
pedal is pressed down with a force. Press the
"ENGINE START STOP" switch to start the
motor.
The "ENGINE START STOP" should be
pressed down slowly and firmly.