BYD e6A, Owner'S Manual

Page: 181 / 195

BYD e6A AUTO Owner's Manual
Electric Appliance 5-21
If the headlights or other electric devices do
not work, please check the fuses. When
necessary, replace the fuses.
For information on location of fuses, refer to
section 5-1"Location of Fuses".
Turn off power switch and other
malfunctioning devices. Pull out the fuses
with potential malfunction vertically and check
them.
Find out which fuse has trouble. Circuit name
of each fuse is indicated on cover of the fuse
box. See Section 5-4 for control function of
each circuit.
Use an extraction tool to pull A type fuse out.
If you are not sure whether the fuse is burnt
out, replace it with a good one.
If the fuse is burnt out, insert a new fuse into
the fuse socket.
Only install a fuse with amperage specified on
the fuse box.
If there is no spare fuse in emergency
situation, you can pull out "29. Indoor Light"
fuse, which is not essential in driving, and use
it as a substitute for a fuse with the same
amperage.
If there is no fuse of the same amperage, you
should choose a fuse with lower amperage;
try to get a fuse with the amperage as close to
the rated amperage as possible. If you use a
fuse with lower amperage, it may be burned
out again, but this doesn't mean the vehicle
has a problem. You must install a proper fuse
as soon as possible, and put back the
substitute fuse.
It is recommended that you keep a set of
spare fuses on the vehicle for emergency
use.
If a new replaced fuse is burnt out
immediately, the electrical system may have
problem. Contact BYD service station for a
check as soon as possible.
Add Cleanser
If the washer fluid does not work, the washer
fluid tank may have been empty. Check the
washer fluid level on the content gauge. If the
level is below "LOW" mark, you must add
washer fluid.
Tips
Never use a fuse with higher amperage
than the rating amperage or use any other
objects to replace the fuse, otherwise it may
cause serious damage and may lead to fire