BYD e6A Owner'S Manual Download Page 137

Page: 137 / 195

BYD e6A AUTO Owner's Manual

Emergency Treatment 3-5

Tools Required and Spare Tire

a. Take out tools required and the spare tire.

．

Toolkit

．

Jack

．

Spare tire

In emergency conditions, you may have to

repair the car by yourself. Please well know

the use method and storage location of the

jack and various tools.

Rotate the terminal of the jack manually

Remove: rotate the terminal in direction 1

until the jack become flexible.

Storage: rotate the terminal in direction 2 until

the jack is fixed tightly to prevent it from being

thrown forward when there is crash or

emergency braking.

To remove the spare tire, loosen and remove

the spare tire support, then take out the spare

tire.

To store the tire, please put the outside of the

tire downward in place, and then fasten the

tire in the opposite order to prevent it from

being thrown forward when there is crash or

emergency braking.

Notice: Pay attention to the spare tire support

fixing method, and make sure the higher boss

facing upwards when fastening the original

spare tire.

Summary of Contents for e6A




































































































































































































Search results

Summary of Contents for e6A

Reviews:

Related manuals for e6A

Brands by name

Popular brands

BYD e6A, Owner'S Manual

Search results

Summary of Contents for e6A

Reviews:

Related manuals for e6A

Brands by name

Popular brands