28
EN
The maximum level of 100% in the multi-info touch
display corresponds to a regenerative filling level of
approx. 46 cm in the regenerative container.
NOTE
►
Overfilling past the 100% mark can re
-
sult in implausible fill level values being
reported. To prevent this, remove any
excess regenerative.
8.6
Changing the mineral substance
container
After a certain defined amount of water has been
consumed, the following message appears on the
display: Change mineral substance container soon.
Place a new mineral substance container (BWT
Smart Mineral) at the ready.
When the mineral substance is depleted, a mes-
sage appears on the screen: Mineral substance
container empty.
To change the mineral substance container,
proceed as follows:
●
Open the technology cover of the product.
●
Remove the empty mineral substance container
and place it inside the product.
●
Remove the suction lance from its mount by
turning anticlockwise and set it aside.
●
Remove the aluminium seal from the fresh min-
eral substance container.
●
Place the fresh mineral substance container on
the cover inside the product.
●
Insert the suction lance into the mineral sub-
stance container and turn it clockwise to attach
it to the mount.
Summary of Contents for Perla hybrid
Page 58: ...58...
