26
EN
8
Operation
The device status display (BWT logo) and the touch
display are in an idle state in energy saving mode
and are switched off. When approaching the prod
-
uct, they are activated via a proximity sensor and
switched on. The proximity sensor is located in the
chrome panel on the front of the device.
20
Touch display
21
Proximity sensor
22
Area for tip-on opening
23
Device status display
8.1
Opening the Easy Fill technology
cover
Easy Fill technology cover with handleless tip-on
function. To open, tap lightly on the white area of
the housing above the status display. The Easy Fill
technology cover then opens automatically thanks
to a built-in mechanism.
8.2
Closing the Easy Fill technology
cover
To close, press the Easy Fill technology cover down
gently until it snaps shut.
8.3
Device status display
The device status is indicated by the coloured BWT
logo on the device cover.
Blue Operation
Yel-
low
Notification
(e.g. regenerative empty)
Red Fault
20
23
21
22
Summary of Contents for Perla hybrid
Page 58: ...58...
