5 - 24
CNC AXIS MODULES
Edition 06.2005
5.4
Digital axis module SERC (continuation)
Status-
Meaning of the status messages
display
0
Phase 0
phase switching actively
1
Phase 1
phase switching actively
2
Phase 2
phase switching actively
3
Phase 3
phase switching actively
b
Phase 4
„ ready for use „
The performance can be connected and the drives be traversed.
5.
Test operation zero-bit stream
The test operation, “ zero-bit stream “ was selected.
Reaction by SERC
SERC transmits zero-bit stream and prevents the phase build-up.
A cause
Test operation over DIP SWITCH SD1 switch 1 activates.
Remedial action
DIP SWITCH SD1 switch 1 switch off.
6.
Test operation steady light
The test operation, ‘ steady light ‘ was selected.
Reaction by SERC
SERC transmits steady light and prevents the phase build-up.
A cause
Test operation over DIP SWITCH SD1 switch 2 activates.
Remedial action
DIP switch SD1 switch 2 switch off.
Summary of Contents for CONTROL SYSTEM 900
Page 13: ...1 12 INTRODUCTION Edition 12 2005 ...
Page 22: ...2 9 CHASSIS Edition 06 2005 2 3 Chassis measurement Chassis side view 4 186 5 247 18 5 284 ...
Page 177: ...8 12 ANALOG INPUT OUTPUT MODULES Edition 06 2005 ...
Page 258: ...10 49 OPERATING PANELS Edition 11 2005 10 8 Teachpanel continued ...