2 - 16
CHASSIS
Edition 06.2005
2.8
Coupling module KOP (continued)
Coupling of chassis groups
The chassis groups are composed of individual chassis which are plugged together under normal
conditions. Consequently, the BUS connection is realized simply and quickly.
In case the chassis cannot be mounted side by side, the BUS connection has to be realized by
means of the coupling module (having an integrated power unit) and the connection cable (art. no.
084077).
The chassis groups are divided into basic chassis and additional chassis. The basic chassis group
contains the power unit, the central unit and the slots for the axial modules resp. the POS modules.
The groups of the additional chassis consist of the coupling module and the slots for the I/O
modules. The power supply is hereby performed by means of the integrated power unit of the
coupling module.
The coupling module can be operated both in an 8-chassis and a separate 1-chassis. If there is
used a separate chassis for the coupling module, all of the slots of the 8-chassis are available for I/
O modules.
Notice:
The power supplies of the basic chassis and the additional chassis
must
always be switched on
simultaneously
!
Example 1:
A chassis group consisting of 4 x 8-chassis arranged in 1 group side by side.
Summary of Contents for CONTROL SYSTEM 900
Page 13: ...1 12 INTRODUCTION Edition 12 2005 ...
Page 22: ...2 9 CHASSIS Edition 06 2005 2 3 Chassis measurement Chassis side view 4 186 5 247 18 5 284 ...
Page 177: ...8 12 ANALOG INPUT OUTPUT MODULES Edition 06 2005 ...
Page 258: ...10 49 OPERATING PANELS Edition 11 2005 10 8 Teachpanel continued ...