10 - 32
OPERATING PANELS
Edition 11.2005
10.6
Operating panel CNC 900 (continued)
Technical data
Processor
CPU 80C188 / 20MHz
Graphics
For selecting a passive color LCD-(STN)
Color LCD
Color VGA (640 x 480)
with function keys in the display frame
Memory
256 kbyte EEPROM for PROMA pictures
256 kbyte operating system EEPROM
256 kbyte S-RAM
Inputs/outputs
3 override inputs
1 input for manual operating panel
4 switch inputs
1 serial input/output 20 mA, connection of manual operating panel
1 serial input/output 20 mA, connection of control unit
1 serial input/output 20 mA or V24 input/output for periphery interface,
IO-traffic CNC or programming interface for flash EEPROM
1 serial input/output RS422 for servicing purposes
Keyboard
For control functions with cursor keys and numerical key field
Front
In IP65 design
with 2 potentiometers and emergency power-off switch
Power unit
Operating voltage 24V= or 22V
∼
, admissible range from 22V to 35V,
current consumption 1.6A for 24V=.
The primary and secondary voltages are electrically isolated in the power unit.
Therefore, an isolating transformer is not required.
Working temperature up to + 40°C
Summary of Contents for CONTROL SYSTEM 900
Page 13: ...1 12 INTRODUCTION Edition 12 2005 ...
Page 22: ...2 9 CHASSIS Edition 06 2005 2 3 Chassis measurement Chassis side view 4 186 5 247 18 5 284 ...
Page 177: ...8 12 ANALOG INPUT OUTPUT MODULES Edition 06 2005 ...
Page 258: ...10 49 OPERATING PANELS Edition 11 2005 10 8 Teachpanel continued ...