buster M, Owner'S Handbook Manual, Page: 185 / 257

”
Fiskars Boats, Inha Works Ltd 2011
12 (39)
WARNING! The bilge pump system is not designed to deal with leaks
resulting from running aground or leaks that occur as a result
of other damage.
N.B.! Check the operation of the bilge pump at regular intervals.
Clear any debris from the end of the pump suction hose.
5.6.3 Stability and buoyancy
The stability of a Buster is excellent thanks to the hull form and weight distribution.
Even so, beware of large breaking waves, which always represent a serious danger
to stability.
Note that your boat’s stability will be compromised if any additional weight is placed
too high in the boat. This may even cause the boat to capsize. All changes resulting
from positioning bulky objects can significantly influence the stability, trim and
performance of your boat. If you are planning such modifications, please contact the
boat’s manufacturer.
The amount of water in the bilge should be kept at a minimum as the free movement
of water in the boat always decreases stability.
Note that stability can also be diminished when towing or being towed.
The Buster XL, M S and XS are equipped with pontoons to help the boat carry loads,
as defined in paragraph 5.4, even when the boat has filled with water.
5.7 Prevention of fire and explosions
5.7.1 Engines and fuel systems
The Buster Magnum and XL are fitted with a fixed fuel tank located in the bilge
approx. 1 m from the transom. The M, S, Scc, XSR and XS models use slip tanks.
Before refuelling, switch off the engine. Do not smoke while refuelling and otherwise
avoid naked flames. Do not use any electrical devices.
In boats with fixed tanks, the inlet ( ) is located on the right-hand side aft deck. To
fill a slip tank, it must be lifted out of the boat to avoid any fuel getting into the bilge in
the event of the fuelling procedure resulting in an overflow.
When fuelling at a petrol station, do not use a plastic funnel as it prevents the
discharge of static electricity between the filling nozzle and the inlet rim. After filling
up the tank, ensure that fuel has not entered the bilge or engine well, and
immediately clean off any possible spatter (see Fuel tank capacity; Appendix 1:
Technical specifications).