Burstner Averso Instruction Manual Download

Page: 76 / 224

Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN

Living

6.14.2

Bench and central seating group with additional cushion

Convert the table (Fig. 95,3) to a bed foundation (see section 6.12).

Remove the back cushion (Fig. 96,5) and lay it aside.

Pull the seat cushion (Fig. 96,2) into the middle.

Place the back cushion (Fig. 97,1) between the seat cushion and the wall.

Place the additional cushion (Fig. 97,6) between the seat cushions
(Fig. 97,2 and 4).

Depending on the model, the seating group can be different in shape and
position to the one shown here.

Fig. 95

Prior to conversion

Fig. 96

During conversion

Fig. 97

After conversion

1 Back cushion

2 Seat cushion

3 Table

4 Seat cushion

5 Back cushion

6 Additional cushion (basic)

Summary of Contents for Averso

































































































































































































































Search results

Summary of Contents for Averso

Reviews:

Related manuals for Averso

Brands by name

Popular brands

Burstner Averso, Instruction Manual

Search results

Summary of Contents for Averso

Reviews:

Related manuals for Averso

Brands by name

Popular brands