Burstner Averso Instruction Manual Download

Page: 46 / 224

Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN

Living

6.2.1

Flap lock, elliptical-shaped

Opening:

Insert key into locking cylinder (Fig. 33,1) and turn a quarter turn in an anti-
clockwise direction. The lock handle (Fig. 33,2) snaps out.

Remove the key.

Turn lock handle one quarter turn in an anticlockwise direction. The flap
lock is open.

Closing:

Firmly close the external flap.

Turn lock handle in a clockwise direction until it is horizontal. The flap lock
is now engaged but not locked.

Insert key into locking cylinder.

Press down lock handle with key inserted and turn key a quarter turn in a
clockwise direction. The lock handle will stay bolted.

Remove the key.

During rain, water can penetrate the opened flap lock. Therefore close the
lock handle.

Fig. 33

Flap lock, elliptical-shaped,

closed

Summary of Contents for Averso

































































































































































































































Search results

Summary of Contents for Averso

Reviews:

Related manuals for Averso

Brands by name

Popular brands

Burstner Averso, Instruction Manual

Search results

Summary of Contents for Averso

Reviews:

Related manuals for Averso

Brands by name

Popular brands