Burstner Averso, Instruction Manual

Page: 125 / 224

125
Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN
Appliances
9
Switching on:
„
Connect the vehicle to the external 230 V power supply and switch on the
230 V automatic circuit breaker.
„
Switch on the operating switch (Fig. 159). Indicator lamp (Fig. 159,1) on
the switch is illuminated. The water in the hot water source is heated up to
65 °C.
Switching off:
„
Switch off the operating switch (Fig. 159). Indicator lamp (Fig. 159,1) on
the switch goes off.
Filling the hot water source
with water:
„
Connect the vehicle to the external 230 V power supply and switch on the
230 V automatic circuit breaker.
„
Switch off the operating switch (Fig. 159). Indicator lamp (Fig. 159,1) in the
switch is not on.
„
Close all drain cocks. To do this, close the caps (Fig. 160,1) by turning
them in a clockwise direction.
„
Set all the water taps to "Hot" and open them. The water pump is turned
on. The warm water pipes are filled with water.
„
Keep the taps open until the water flowing out of the taps has no bubbles
in it. This is the only way to ensure that the hot water source is full of water.
„
Close all water taps.
Emptying the hot water
source:
„
Switch off the 230 V power supply on the 230 V automatic circuit breaker.
„
Open the stopper of the water tank.
„
Open all water taps and set to the central position.
„
Hang the shower handset up in the shower position.
„
Hold the water pump up until the water pipes are completely empty.
„
Open all drain cocks of the hot water source. To do this turn the caps
(Fig. 160,1) in an anticlockwise direction.
„
Check whether the water is completely drained from the hot water source.
Fig. 160 Drain cock for hot water source
Z
Further information can be obtained in the manufacturer's instruction
manual.