Burstner Averso, Instruction Manual

Page: 70 / 224

70
Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN
Living
6
Conversion to round seating
group:
„
Open two locks (Fig. 84,2) on the underside of the table top.
„
Pull lift-off table (Fig. 84,3) slightly toward the centre.
„
Lift the table-top of the suspension table (Fig. 84,1) approx. 45°.
„
Pull lower section of the suspension table foot downwards and fold over by
90°.
„
Remove the suspension table from its upper retainer.
„
Hook suspension table into the lower retainer and use the foot to place on
the ground.
„
Place additional cushions.
„
Push lift-off table to the rear again (Fig. 85).
6.13 Beds
6.13.1 Bunk bed
Depending on the model, the vehicle is fitted with a bunk bed. The bunk bed
can be used immediately, without additional conversion.
Always use the access ladder provided to climb up to the top bed.
6.13.2 Fixed bed (manual setup)
The bedding box is located underneath the bed. The bedding box may be used
to store bedding.
Fold up the slatted frame to place items in the bedding box or to empty it.
Depending on the model, a rail has been fitted to the slatted frame to set it up.
X
Only use the upper bunk bed if the safety guard is fitted.
X
The maximum permitted bunk bed load is 100 kg.
X
The upper bunk bed must not be used by children under 6 years of age.
X
Never allow small children to remain in the bunk bed without supervision.
X
But in particular with regard to small children less than 6 years of age,
users should ensure that they cannot fall out of the bunk bed.
X
Use separate children's beds or travel cots suitable for children.
X
Do not let the slatted frame fall down when closing the bed!
Fig. 86 Fixed bed