background image

49

Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN

Living

6

6.2.6

Cap for the drinking water filler neck (only for water tank 
40 l)

Opening:

„

Insert the key in the locking cylinder (Fig. 38,2) and turn it in an anticlock-
wise direction.

„

Remove cap.

Closing:

„

Insert the cap in the drinking water filler neck.

„

Turn key in a clockwise direction.

„

Remove the key.

6.3

Furniture flaps

6.3.1

Furniture flaps with push button

Opening:

„

Press inner part of the lock. The push button jumps out (Fig. 39 or Fig. 40).

„

Hold push button and open furniture flap.

Fig. 38

Cap for the drinking water filler 

neck

Z

The drinking water filler neck is indicated by the symbol "

" (Fig. 38,1).

Z

Before commencing the journey, close all furniture flaps and inner doors 
and lock them.

Z

The furniture flaps shown in this section are examples. Depending on the 
model, the locks and handles on the furniture flaps may differ to those dis-
played here.

Fig. 39

Furniture flap with push button 

(round)

Fig. 40

Furniture flap with push button 

(square)

Summary of Contents for Averso

































































































































































































































Reviews: