Burstner Averso, Instruction Manual

Page: 137 / 224

137
Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN
Appliances
9
Refrigerating temperature
control
When turned on the refrigerator automatically selects the thermostat position
selected last. This position can be adjusted manually by using the arrow keys
(Fig. 172,2). The illuminated bars of the cooling level indicator (Fig. 172,5)
show the selected thermostat position. The refrigerating temperature for the
three types of energy is set with the arrow keys. It takes a few hours till the
refrigerator reaches its normal operating temperature. When changing over
the operating mode the thermostat setting will be maintained. The refrigerating
temperature is retained regardless of the type of power being used.
Gas operation
Switching on:
„
Open the regulator tap on the gas bottle and the gas isolator tap "Refriger-
ator".
„
Press and hold the On/Off button (Fig. 172,1) for 1 second. Button
(Fig. 172,1) lights up green. To save energy, after approximately
10 seconds the display is dimmed.
„
Press confirmation button (Fig. 172,3). The current setting of the operating
is displayed.
„
If the operating mode gas is not set: To change the setting, press and hold
the confirmation button (Fig. 172,3) for approximately 2 seconds.
„
Using the arrow keys (Fig. 172,2) select the operating mode gas. Gas
supply is open. Ignition will take place automatically. A ticking sound can
be heard until ignition has been completed successfully.
„
Press and hold the confirmation button (Fig. 172,3) for about 2 seconds.
„
Press confirmation button (Fig. 172,3) again. The current cooling level is
shown by the illuminated bars (Fig. 172,5).
„
To change the setting, press the arrow keys (Fig. 172,2) until the desired
setting is displayed.
Switching off:
„
Press and hold the On/Off button (Fig. 172,1) for about 2 seconds. All lights
go out. Refrigerator is switched off.
„
Close the gas isolator tap "Refrigerator" and the regulator tap on the gas
bottle.
Z
The refrigerator always requires a 12 V control voltage, regardless of which
type of energy it is using. The control voltage is present as soon as the
transformer/rectifier is switched on. Therefore the closed circuit current
always flows even if the refrigerator is switched off. Always switch off the
transformer/rectifier for a temporary lay-up.
Z
We recommend that the refrigerator be operated in 12 V operation when
the vehicle is in motion.
When the vehicle is stationary, we advise you to operate the refrigerator in
230 V operation, assuming a 230 V connection is available.
In all other cases, the refrigerator can be operated in gas operation.
X
Never let gas escape unburned due to danger of explosion.