Burstner Averso Instruction Manual Download

Page: 170 / 224

170

Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN

Maintenance

12.7.3

Side lights

Marker lights

The marker lights (Fig. 208,2) are fitted in the lower part of the side wall of the
vehicle.

Side marker light

The side marker light (Fig. 208,1) is fitted in the upper part of the side wall of
the vehicle.

12.7.4

Types of bulbs for exterior lighting

12.8

Replacing bulbs, internal

Fig. 208 Side lights

1 Side marker light

2 Marker light

The lights have LEDs. To change the LEDs, contact an authorised dealer
or a service centre.

Item
no.

Exterior lighting

Type of bulb

Front

Front light

LED

Rear

Rear light

Ba15s 12 V 5 W

Brake light

Ba15s 12 V 21 W

Direction indicator

Ba15s 12 V 21 W orange

Reverse light

Ba15s 12 V 21 W

Fog tail light

Ba15s 12 V 21 W

Licence plate light

LED

Third brake light

LED

Side

Side marker light

LED

Marker light

LED

Bulbs and light fittings can be extremely hot. Therefore, allow lights to
cool down before changing bulbs.

Shut off the power supply on the safety cut-out in the 230 V fuse box
before changing bulbs.

Store bulbs in a safe place inaccessible to children.

Do not use any bulb that has been dropped or which shows scratches in
its glass. The bulb might burst.

Summary of Contents for Averso

































































































































































































































Search results

Summary of Contents for Averso

Reviews:

Related manuals for Averso

Brands by name

Popular brands

Burstner Averso, Instruction Manual

Search results

Summary of Contents for Averso

Reviews:

Related manuals for Averso

Brands by name

Popular brands