manualshive.com logo in svg

Burstner Averso, Instruction Manual

Share
Download
Burstner Averso Instruction Manual Download Page 180

180

Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN

Wheels and tyres

13

13.5.2

Tightening torque

X

No persons may be in the vehicle while it is is raised.

X

Whilst the vehicle is in a jacked up position, persons must not lie down 
under it.

Z

Do not damage the thread of the thread bolt or wheel bolt when changing 
the wheel.

Z

Tighten the wheel nuts or wheel bolts cross-wise (Fig. 221).

Z

When changing wheels (e.g. alloy wheel rims or wheels with winter tyres), 
use the correct wheel bolts of the correct length and shape. Otherwise the 
wheels may not be securely fixed or the braking system may not work cor-
rectly.

Z

The use of wheel rims or tyres that are not approved for the vehicle can 
make it less than fully roadworthy; such wheel rims or tyres must be sepa-
rately inspected and approved by an accredited test centre.

Z

Protect the vehicle according to the national regulations, e.g. with a hazard 
warning triangle.

Z

Before changing the wheel, check the wheel rim and tyre size, the max. tyre 
load and the speed index on the tyres. Only use the wheel rim and tyre 
sizes stated in the vehicle documents.

Z

If different wheel nuts or wheel bolts are required for the vehicle tyres and 
the spare wheel, the wheel nuts or wheel bolts for the spare wheel will be 
supplied with the vehicle.

X

When fitting alloy wheel rims, only use the wheel bolts supplied.

Fig. 222 Wheel bolts

1 Wheel bolt - spherical

2 Wheel bolt - conical

Summary of Contents for Averso

































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands