Burstner Averso Instruction Manual Download

Page: 114 / 224

114

Premio/Averso - 13/14 - Ausgabe 09/13 - 2354619 - BUE-0048-12EN

Appliances

9.2.5

Ultraheat additional electric heater (special equipment)

The Ultraheat additional electric heater is built-in to the hot-air heater. There-
fore there are three heating options:

Only the hot-air heater

Hot-air heater and electric heater

Only the electric heater

The vehicle can be heated more quickly with the additional electric heater.

Switching on:

Connect the vehicle to the 230 V power supply (see section 8.5).

Turn the rotary switch (Fig. 146,1) to the desired output level (500, 1000 or
2000 W).

Turn temperature control knob (Fig. 146,3) to the desired output level.

Switching off:

Turn the rotary switch (Fig. 146,1) to " " (Fig. 146,2).

The additional electric heater only operates if the vehicle is connected to
the 230 V power supply.

If the heater is operated by electricity and gas simultaneously, the addi-
tional electric heater switches off to prevent possible overheating by the
stronger gas burner.

Fig. 146 Operating unit for Ultraheat

additional electric heater

1 Rotary switch

2 Off

3 Temperature control knob

Summary of Contents for Averso

































































































































































































































Search results

Summary of Contents for Averso

Reviews:

Related manuals for Averso

Brands by name

Popular brands

Burstner Averso, Instruction Manual

Search results

Summary of Contents for Averso

Reviews:

Related manuals for Averso

Brands by name

Popular brands