BURNiT CombiBurn DC-A v2 series, Installation And Operation Manual

Page: 10 / 36

10
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
Table 2. European Certification of Wood Pellets for Heating Purposes
Parameters Units ENplus-A1 ENplus-A2 EN-B
Diameter mm
6 (± 1)
8 (± 1)
6 (± 1)
8 (± 1)
6 (± 1)
8 (± 1)
Length mm 15 ≤ L ≤ 40
1)
15 ≤ L ≤ 40
1)
15 ≤ L ≤ 40
1)
Bulk density kg / m
2
≥ 600 ≥ 600 ≥ 600
Calorific/heating value MJ / kg ≥ 16,5-19 ≥ 16,3-19 ≥ 16,0-19
Humidity /moisture Ма .-% ≤ 10 ≤ 10 ≤ 10
Dust Ма .-% ≤ 1
3)
≤ 1
3)
≤ 1
3)
Mechanical durability Ма .-% ≥ 97,5
4)
≥ 97,5
4)
≥ 96,5
4)
Ash Ма .-%
2)
≤ 0,7 ≤ 1,5 ≤ 3,5
Melting point of ash °C ≥ 1200 ≥ 1100 -
Chlorine content Ма .-%
2)
≤ 0,02 ≤ 0,02 ≤ 0,03
Sulfur content Ма .-%
2)
≤ 0,03 ≤ 0,03 ≤ 0,04
Nitrogen content Ма .-%
2)
≤ 0,3 ≤ 0,3 ≤ 1,0
Copper content mg / kg
2)
≤ 10 ≤ 10 ≤ 10
Chromium content mg / kg
2)
≤ 10 ≤ 10 ≤ 10
Arsenic content mg / kg
2)
≤ 1,0 ≤ 1,0 ≤ 1,0
Cadmium content mg / kg
2)
≤ 0,5 ≤ 0,5 ≤ 0,5
Mercury content mg / kg
2)
≤ 0,1 ≤ 0,1 ≤ 0,1
Lead content mg / kg
2)
≤ 10 ≤ 10 ≤ 10
Nickel content mg / kg
2)
≤ 10 ≤ 10 ≤ 10
Zinc content mg / kg
2)
≤ 100 ≤ 100 ≤ 100
1)
not more than 1% of the pellets may be longer than 40 mm, max. length 45 mm;
2)
dry weight;
3)
particles <3.15 mm, particulate matter, before handing over the goods;
4)
measurements with Lignotester limit value ≥ 97,7% by weight.
3.2. (T
able 3.)
Alternative fuels - Wood chips corresponding to EN 14961-1 P16A
Class
Main fraction, at
least 75-w%, mm**
Fine particles, w-%
(<3,15 mm)
All - main and fine particles, w-%
P16A* 3,15 ≤ P ≤ 16 mm ≤ 12 % ≤ 3% >16 mm and all <31,5 mm*
** Cross-sectional area of the oversized particles is as follows: P16 <1 cm²;
** The numerical values for size (class P) refer to the amount of particles which pass through the
circular opening with sieve plates in accordance with standard EN 15149-1;
See Tables 8, 9, 10, 11 and 12 for the controller parameters