Burkert 8681 Operating Instructions Manual Download Page 15

Page: 15 / 166

System Description

SYSTEM DESCRIPTION

5.1

Intended application area

The control head Type 8681 has been designed for use as an actuator for pneumatically operated process

valves and / or for recording the switching status of these.

5.2

General description

The control head Type 8681 is used for actuating pneumatically operated process valves.

For process valve actuation, the control head can be equipped with up to three solenoid valves.

For the recording and feedback of the process valve switching positions to a higher-level control, the control

head has been equipped with a contact-free position measuring system which operates with 3 discrete,

adjustable feedback signals (Teach functions).

The control head and the process valve are interconnected by an adapter. This produces an integrated,

compact and decentralised system of feedback, actuation and valve function. The following advantages

over centralised solutions working with valve clusters are achieved:

•

low installation expenditure

•

easy start-up

• higher application-specific flexibility

•

shorter switching times and less air consumption due to shorter distances between the pilot valves and

the process valve. Up to 3 solenoid valves in the control head serve as pilot valves.

Various pneumatic and electrical connection or communication variants are available, and described in

detail below.

english

Control Head Type 8681

Summary of Contents for 8681







































































































































































Search results

Summary of Contents for 8681

Reviews:

Burkert 8681, Operating Instructions Manual, Page: 15 / 166

Search results

Summary of Contents for 8681

Reviews: