Burkert 8681 Operating Instructions Manual Download Page 13

Page: 13 / 166

Basic Safety Instructions

NOTE!

Electrostatic sensitive components/modules!

• The device contains electronic components which react sensitively to electrostatic discharge (ESD). Contact

with electrostatically charged persons or objects may be hazardous to these components. In the worst

case scenario, they will be destroyed immediately or will fail after start-up.

• Observe the requirements in accordance with EN 61340-5-1 to minimise or avoid the possibility of damage

caused by sudden electrostatic discharge!

•

Also ensure that you do not touch electronic components when the operating voltage is on!

NOTE!

Risk of damage to property!

•

Do not connect any mechanically rigid connection parts, in particular those with long lever arms, as

such connections could generate torques that might damage the control head.

• Do not supply the medium connections of the system with liquids or aggressive or flammable media!

• Do not subject the housing to mechanical loads (e.g. by placing objects on it or standing on it).

•

Do not make any external changes to the housings of the device. Do not paint housing parts or screws.

•

Only use compatible cleaning agents for cleaning the securely closed control head and always rinse

thoroughly with clean water.

english

Control Head Type 8681

Summary of Contents for 8681







































































































































































Search results

Summary of Contents for 8681

Reviews:

Burkert 8681, Operating Instructions Manual, Page: 13 / 166

Search results

Summary of Contents for 8681

Reviews: