Bull NovaScale 5xx5, Installation Manual, Page: 93 / 140

2-43
Setup Procedure
Novell SuSe Setup
1. Select the first Linux SuSe domain in the Control pane scheme and click Power On to
power up the domain and associated hardware components.
2. Toggle the local / integrated console from the PAP unit display to
MyOperations-1
or
MyOperations-2 or MyOperations-3 or MyOperations-4 display, as required. See
Toggling the Local / Integrated Console Display , on page 2-12.
3. Check Regional, Date/Time, and Time Zone settings.
4. Place the Linux SuSe CD-Rom in the corresponding drive. Setup is completed via the Yast
Control Center administration tool:
a. Type the default User Name and Password, followed by
Enter
.
User Name
root
Password
root
b. Enter yast2 (graphical mode) or yast (non-graphical mode) to open the Yast Control
Center main page.
Note:
Use the
<Tab>
and
<Arrow>
keys to navigate through the menus.
c. Click
Network/Basic
→
Network Card Configuration
.
d. Select the required network card and click
Configure
.
e. From the
Network Address Setup
page, select the setup method and complete the
required fields with the data supplied by the Customer.
f. From the Details settings area, click Host name and name server . Complete the
required fields and click Next .
g. From the Details settings area, click Routing . Complete the required fields and click
Next
to return to the
Network Card Configuration
page. Your network card is
displayed in the Already configured devices area.
h. Click Close to exit Yast Control Center. Once setup is complete, the network is
activated.
5. Shut down the domain and associated hardware components by selecting the Shut Down
command in the
Start Menu
.
6. Toggle the local / integrated console from the domain display to the PAP unit display. See
Toggling the Local / Integrated Console Display , on page 2-12.
7. Update Domain Identity Management Parameters :
a. From the Customer Administrator PAM Tree, click
Domains
→
Identities
.
b. Select the corresponding
Domain Identity
and click
Edit
. The
Edit Identity
dialog
opens.
c. Complete the Network Name , IP Address , and URL fields with the data entered during
the setup completion procedure.
8. Repeat steps 1 to 7 for each pre-installed Linux SuSE instance.