Bull NovaScale 5xx5, Installation Manual, Page: 83 / 140

2-33
Setup Procedure
Connecting to the PAM Web Site from a Remote
Computer/Workstation
Important:
For optimum security, before connecting to PAM from a remote computer, you are advised to
disconnect from your local Windows session on the PAP unit by clicking Start
→
Log Off.
The PAM Software utility can be accessed from any PC running Microsoft Windows with the
Internet Explorer (6 or later) browser installed
and/or from any workstation running Linux
with the
Mozilla
(1.6 or later) browser installed
.
Enabling Remote Access to the PAM Web Site with Internet Explorer
1. From the remote computer, configure Internet Explorer to connect directly to the PAM Web
site:
a. From the Internet Explorer main menu bar, select Tools
→
Internet Options
→
Home
Page
.
b. Type the PAM Web site URL defined during the PAP installation procedure in the home
page address field: http:// <PAPname>/pam
(where
<PAPname>
is the name allocated to PAP unit during setup).
c. Save your changes and close Internet Explorer.
2. Launch Internet Explorer to connect directly to the PAM web site.
3. When prompted, enter the appropriate Administrator or Operator User Name and
Password
. The PAM home page appears.
Enabling Remote Access to the PAM Web Site with Mozilla
1. From the remote computer, configure Mozilla to connect directly to the PAM Web site:
a. From the Mozilla main menu bar, select Edit
→
Preferences
→
Navigator .
b. Check the Home Page box and enter the PAM Web site URL defined during the PAP
installation procedure in the location field:
http:// <PAPname>/pam
(where
<PAPname>
is the name allocated to PAP unit during setup).
c. Save your changes and close Mozilla.
2. Launch Mozilla to connect directly to the PAM web site.
3. When prompted, enter the appropriate Administrator or Operator User Name and
Password
. The PAM home page appears.