Bull NovaScale 5xx5, Installation Manual, Page: 82 / 140

2-32
Installation Guide
Connecting the PAP Unit to the Customer's Enterprise LAN
CAUTION:
Remote access via the Web is a potential security hazard. Customers are strongly advised to
protect their systems with up-to-date protection devices such as virus-prevention programs
and firewalls, and to maintain a detailed record of authorized users.
Once PAP unit configuration is complete, it can be connected to the Customer's Enterprise
LAN.
The PAP unit provides two RJ45 Ethernet ports. The first is used for the internal server network
and the second for connection to the Customer's Enterprise LAN for remote platform
administration and maintenance.
1. Open the rear door and remove the left side cover.
2. Guide the Enterprise network cable supplied by the Customer through the cable cut-out at
the base of the cabinet and up through the free space on the left side of the cabinet.
3. Access the PAP unit RJ45 Ethernet ports from the rear of the cabinet.
Free Ethernet port
Figure 47. PAP unit free Ethernet port
4. Secure the Enterprise network cable to the left flange of the cabinet with the velcro
fasteners supplied in the Open Me First kit.
5. Close the rear door and refit the left side cover.
Important:
If the PAP unit is not connected to the Customer's Enterprise LAN, the remote maintenance
autocall and certain event messaging options will not be enabled.