73
Operating Environment
Temperature: 5 - 35°C; 41 - 95° F
Environment Humidity: 20 - 80% (no condensation)
Compatibility
Windows and Mac computers with Ethernet interface.
Note:
The TeraStation requires an Ethernet connection with your computer for
operation. It cannot be connected via USB.
Supported OS
Windows 8.1
*
, Windows 8
*
, Windows 7
*
, Windows Vista
*
, Windows XP, Windows 2000,
Windows XP Media Center Edition (2004 or 2005), Windows Server 2012, Windows
Server 2012 R2, Windows Server 2008, Windows Server 2008 R2, Windows Server 2003,
Windows 2000 Server
OS X 10.9, 10.8, 10.7, 10.6, 10.5, 10.4
*32-bit and 64-bit
Data Backup
While using the TeraStation, you may lose your important data due to sudden accidents, hard disk failure, or accidental
misoperation. Back up your data regularly! For best results, back up your data to Buffalo drives like the TeraStation,
LinkStation, or DriveStation series.
Troubleshooting
If you can’t access your TeraStation:
Typical problems and when you are unable to search using NAS Navigator2 and when the Remote Desktop screen does
not open are described below.
Cause 1. The cables are not connected correctly.
The cables are not physically connected, or there may be a contact defect. Reconnect the AC cable and Ethernet cable
and restart both the computer and TeraStation.
Cause 2. Software running in the background is blocking communication.
Add an exception to your rewall software, or disable the rewall software completely. Turn off any software security suite
that might include a rewall. Try searching again.
Cause 3. Wireless and wired adapters are both enabled.
Disable all adapters except for the LAN adapter connected to the TeraStation.
Cause 4. The LAN cable is defective, or the connection is unstable.
Try changing the hub port or Ethernet cable that you use to connect.
Cause 5. The LAN board, card, or adapter that you are using is defective.
Try changing the LAN board, card, or adapter.
Summary of Contents for TeraStation WSS 5000R2
