28
1
Error LED
Red if a drive has failed.
2
Status LEDs
Green: Normal operation.
Glowing red: If a drive’s status LED is glowing red, the drive has malfunctioned. Dismount the drive in Buffalo Dashboard
before unplugging it from the TeraStation.
Notes:
• Do not unplug a drive whose status LED is not lit red. If you remove the drive without properly dismounting it,
data may be lost or the TeraStation may malfunction.
• When changing drives, the replacement drive should be a Buffalo OP-HDS series drive of the same size.
• The TeraStation is fragile. Handle it with care. Do not drop or bump the TeraStation.
• Use caution when handling the unit in order to avoid personal injury.
• Never disassemble any parts while you are replacing a hard drive unless instructed to do so in this manual. Any
malfunction or damage caused by disassembling the TeraStation will void your warranty.
• To avoid damaging the TeraStation with static electricity, ground yourself by touching something made of metal
before handling any sensitive electronic parts.
• Do not change the order of the hard drives in the TeraStation. For example, pulling out drive 1 and replacing it
with drive 2 may cause data to be corrupted or lost.
• In a RAID 1 configuration, the boot drive (C:) consists of the first and second hard drives from the top. Do not
replace both of these hard drives at the same time.
• If a hard drive is replaced while saving a file, the file can be corrupted. Be sure that the saving operation is com-
pleted before replacing the hard drive.
Hard Drive Replacement Examples
Note:
If you used Disk Management to mirror the boot drive, the TeraStation will not boot when the drive fails.
Follow the procedure below.
Hard Drive Replacement in Case of Disk Failure Other Than Drive 1 or Drive 2
1
Double-click the
icon.
2
Right-click on your TeraStation’s icon, then click
Open Remote Desktop
. For Mac OS, click the TeraStation’s icon while
holding down the control key, then click
Open Remote Desktop
.
Summary of Contents for TeraStation WSS 5000R2
