7
into a USB 3.0 port, move the boot switch to the USB position, and press the power button.
14
UPS Port
Connect to a UPS.
15
USB 3.0 Port
Compatible Buffalo USB 3.0 hard drives, USB flash drives, digital cameras, and USB UPSs can be connected. USB
hubs are not supported.
16
USB 2.0 Port
Compatible Buffalo USB hard drives, USB flash drives, digital cameras, and USB UPSs can be connected. USB hubs
are not supported.
17
LAN Port 1
Use an Ethernet cable to connect this port to your network.
18
LAN Port 2
This second Ethernet port may be used for network redundancy or backup. You may connect a second TeraStation
directly to this port for backup.
19
Power Connector
Use the included power cable to connect to an UPS, surge protector, or outlet.
20
Fan
Do not block the fan.
21
Anti-Theft Security Slot
Use this slot to secure your TeraStation with a cable lock (not included).
22
UID Button
Press the UID button on the front or the back of the unit to cycle the blue LED on and off.
23
Serial Number
This sticker shows the TeraStation’s serial number.
24
Link LED
Glows orange when the unit is connected to a network.
25
Act LED
This LED shows network activity. It blinks orange when the TeraStation is accessed over the network.
Installation
Note:
If using OS X (10.4 or later), download and install “Remote Desktop Connection Client for Mac 2” from www.
microsoft.com.
1
Connect the TeraStation’s Ethernet and power cables and turn it on.
2
Connect the supplied USB device to your computer. Open the USB device and double-click
TSNavi.exe
in the
Summary of Contents for TeraStation WSS 5000R2
