70
Chapter 9 Appendix
LCD Display
The LCD display can be cycled through different modes by pressing the display button on the front of the TeraStation.
Modes
LCD Message
Description
LINK SPEED
Note:
When an Ethernet cable is
connected to LAN Port 2, “LINK
SPEED 2” is displayed.
LINK SPEED
No LINK
Not connected to network.
LINK SPEED
10Mbps
Connected at 10 Mbps.
LINK SPEED
100Mbps
Connected at 100 Mbps.
LINK SPEED
1000Mbps
Connected at 1000 Mbps full duplex.
Disk Space Used
HDD
USED
Bar graphs are shown to indicate the used
space for the C, D, E, and F internal drives of
the TeraStation. When a hard drive is full, it is
indicated by “^”.
Hostname/IP Address
WS5000xxx
192.168.11.150
Displays the hostname and IP address.
Calendar/Clock
DATE TIME
2013/1/1 11:11
Displays the date and time set in the
TeraStation.
Installed OS
Windows Storage Server
2012
Displays the OS installed on the TeraStation.
IP Address 2
NETWORK2
192.168.11.151
Displays the IP address of LAN port 2 when
an Ethernet cable is connected to LAN port 2.
Errors and Status
LCD Message
Description
Corrective Action
Summary of Contents for TeraStation WSS 5000R2
