71
SYSTEM Error E11
Fan Failure
An error occurred in the fan speed.
Check that no foreign
objects or dust are
clogging the fan. If any
foreign objects or dust
are found, use a pair of
tweezers, air duster, or
other tool to remove
them. If the error is
displayed again, contact
Buffalo technical support
for assistance.
SYSTEM Error E12
Cooling Failure
A rise in the system temperature may have
exceeded the allowable safety value.
Do not place objects
in the area around the
TeraStation. Also, move
the TeraStation to a cool
location. Make sure that
the TeraStation’s fan is
working normally.
HDx Error E16
HDx Not Found
Unable to find hard drive X.
Hard drive X may be
disconnected or may
have failed. After shutting
down, reinstall the hard
drive.
HDx Broken E30
Replace the DISK
An error occurred, so hard drive X was
removed from the RAID array.
Replace hard drive X.
SYSTEM I10
TOO HOT !
A rise in the system temperature may have
exceeded the allowable safety value.
Move the TeraStation to
a cool location. Do not
place objects in the area
around the TeraStation.
Operation I12
DEGRADE MODE
Operating in degraded mode.
-
RAID I18
xDive Rebuilding
Rebuilding X th drive in the array.
Note:
Transfer speeds are slower during the
rebuilding process.
-
Default Settings
Administrator’s Name
Administrator
Password
password
Shared Folders
No shared folders are preconfigured.
DHCP Client
Normally, the TeraStation will get its IP
address automatically from a DHCP server on
the network. If no DHCP server is available,
then an IP address will be assigned as
follows:
IP Address: 169.254.xxx.xxx (xxx is assigned
randomly when booting the TeraStation).
Subnet Mask: 255.255.0.0
Registered Group
This is not set.
Summary of Contents for TeraStation WSS 5000R2
