Buffalo AirStation Nfiniti WZR-HP-G300NH User Manual Download Page 68

Page: 68 / 179

- 34 -

Chapter 4 Configuration

Parameter

Meaning

IP Address Update Period

Specifies the period to notify the dynamic DNS service provider of
the current IP address. For DynDNS, set it between 0 and 35 days.
For TZO, set it between 0 and 99 days. If 0 (zero) days is set, no
periodic update is performed.

Internet Side IP Address

The WAN-side IP address of the AirStation’s Internet port. This
address is sent to the dynamic DNS service provider.

Domain Name

The domain name assigned by the dynamic DNS Service provider.
The AirStation can be accessed from the Internet using this domain
name.

Status

Display the status of dynamic DNS service.

Summary of Contents for AirStation Nfiniti WZR-HP-G300NH




















































































































































































Search results

Summary of Contents for AirStation Nfiniti WZR-HP-G300NH

Reviews:

Related manuals for AirStation Nfiniti WZR-HP-G300NH

Brands by name

Popular brands

Buffalo AirStation Nfiniti WZR-HP-G300NH, User Manual

Search results

Summary of Contents for AirStation Nfiniti WZR-HP-G300NH

Reviews:

Related manuals for AirStation Nfiniti WZR-HP-G300NH

Brands by name

Popular brands