Buffalo AirStation Nfiniti WZR-HP-G300NH, User Manual

Page: 23 / 179

Setup -> Basic Setup

WAN Setup
o Choose “Disabled” for “Connection Type” (this will be set
automatically).

Network Setup
o Enter the desired LAN-side IP address for the router into “Router
IP”.
o “Disable“ “DHCP Server”.

Time Settings
o Choose your time zone.

Click “Save”.
Wireless -> Basic Settings

Enter your country in “Regulatory Domain”.

In the “Antenna Gain” field, please enter the gain of your
AirStation’s antenna. The firmware will adjust the transmit power
automatically to meet regulatory requirements. Please note that the
use of a long extension cable for your antenna will reduce the
usable antenna gain.

Configure “Wireless Mode” to “Client Bridge”.

Set “Wireless Network Mode” to match the access point you want to
connect to.

Enter the network name (SSID) of the AP you want to connect to.

Click “Save”.
Wireless -> Wireless Security

Configure security to match the security settings of the access
point you want to connect to.

Click “Apply Settings”.
After the router reboots, please confirm that it has connected to the
access point. If there is a DHCP server available on the access point
- 22 -