- 18 -
Chapter 3 Installation
8
Launch a web browser. If the home screen is displayed, setup is complete.
If username and password fields are displayed, enter “root” for the username. Enter “admin”
for the password if you’re using the professional firmware (default), or leave the password
field blank if you’ve switched to the user-friendly firmware. Click [OK]. Step through the
wizard to complete setup.
You’ve completed initial setup of your AirStation. Refer to Chapter 4 for advanced settings.
Firmware Differences
You can choose between two different firmwares for your AirStation. By default, the professional
firmware (dd-wrt) is preinstalled for US/EU products. If you prefer, you may install the user-friendly
firmware instead. The two firmwares have slightly different features, as shown in the chart below.
Function
Professional firmware (dd-wrt)
User-friendly firmware
Router mode switch functionality
─
a
Default administrator name
root
root (fixed)
Default administrator password
admin
none
AOSS
a
a
WPS
a
a
WDS
a
a
Summary of Contents for AirStation Nfiniti WZR-HP-G300NH
