Buffalo AirStation Nfiniti WZR-HP-G300NH User Manual Download Page 138

Page: 138 / 179

- 104 -

Chapter 5 Connect to a Wireless Network

Mac OS X (Wi-Fi)

Use Wi-Fi on a Mac to connect to the AirStation.

Note: In Mac OS X 10.6 and earlier, “Wi-Fi” appears as “AirPort”.

Refer to the label on the side of the AirStation.
Make a note of the SSID and KEY printed on the
label.

Click the

icon in the top

section of the screen and select
[Turn Wi-Fi On].

Find the SSID from step 1 on the list.
Click it to highlight it.

Enter the KEY from step 1 into
the Password entry box, check
[Remember this network], and click
[OK].

It will take several seconds for configuration to complete.

Summary of Contents for AirStation Nfiniti WZR-HP-G300NH




















































































































































































Search results

Summary of Contents for AirStation Nfiniti WZR-HP-G300NH

Reviews:

Related manuals for AirStation Nfiniti WZR-HP-G300NH

Brands by name

Popular brands

Buffalo AirStation Nfiniti WZR-HP-G300NH, User Manual

Search results

Summary of Contents for AirStation Nfiniti WZR-HP-G300NH

Reviews:

Related manuals for AirStation Nfiniti WZR-HP-G300NH

Brands by name

Popular brands