manualshive.com logo in svg

Buffalo AirStation Nfiniti WZR-HP-G300NH, User Manual, Page: 129 / 179

Share
Download
Buffalo AirStation Nfiniti WZR-HP-G300NH User Manual Download Page 129

PUSH

PUSH

Modem

Internet

AirStation

PC or

Game console

(AOSS Devices)

- 95 -

Chapter 5 - Connect to a Wireless Network

Automatic Secure Setup (AOSS/WPS)

AOSS and WPS are systems that let you automatically configure wireless LAN settings. Just pressing 
the buttons will connect wireless devices and complete security settings. Easily connect to wireless 
devices, computers, or game machines which support AOSS or WPS.

AOSS (AirStation One-Touch Secure System) was developed by Buffalo Technology.  WPS 
was created by the Wi-Fi Alliance.

•  Before using AOSS/WPS to connect to a Buffalo wireless client, install Client Manager software from 

the included utility CD. Consult your wireless client’s documentation for more information.

•  Buffalo’s  Client  Manager  software  can  be  used  with  the  wireless  LAN  devices  built  into  most 

computers. However, it is not guaranteed to work with all wireless LAN devices available. Some 
wireless clients may require manual setup.

Summary of Contents for AirStation Nfiniti WZR-HP-G300NH




















































































































































































Reviews:

No comments