Bticino 335828, User Manual

Page: 37 / 72

37
Remote controlling
3
0 5 9 9
2 5 9 9

Check command
• execute the access procedure from the external line;
• select the check code
992
followed by the device
ID number, e.g.:
5 ;

wait for the answer tone:
3 close beeps = enabled
an extended beep =
disabled ;

wait for the “line free” tone;
• hang up, or select a new
command.
✔
The remote control from an external telephone line is not compatible
with the Memotel service with a land line telephone carrier.
✔
The remote control from an external telephone line cannot be used
on external lines programmed for the “Automatic Fax recognition”,
whereas it can be used on the extensions where an answering machine
BEEEEEP
for 2 sec.
BEEP BEEP
BEEP
(enabled)
or
BEEEEEP
for 2 seconds
(disabled)
or
or
■
Commands from an external telephone
line

Deactivation command
• execute the access procedure
from the external line;
• select the activation code 990
followed by the device
ID number, e.g.:
5 ;

wait for the Confirm tone (long
beep);

wait for the Start dialing tone;
• hang up or select a new
command.
✔
If the command is directed to an unavailable device, you will hear a
time-out tone.
✔
A timed relay can be disabled before the set time ends with a special
deactivation command.