![background image](http://html1.mh-extra.com/html/bticino/335828/335828_user-manual_2825521036.webp)
36
Remote controlling
3
3 4
2
1
1 5
9
9
Activation command
• execute the access procedure from the external line;
• select the activation code
991
followed by the device ID
number, e.g.:
5;
wait for the Confirm tone
(3 close beeps);
wait for the Start dialing tone;
• hang up or select a new
command.
BIP BIP BIP
3 sec.
or
■
Commands from an external telephone
line
If the remote control / unlock password is
entered incorrectly, the line will go dead.
Repeat the access procedure from external
line.
In order to be able to send a command
to the switchboard from the external
telephone line, do the following:
• dial the telephone number of the
house (external line to which the
switchboard is connected);
after 6 rings (if unchanged) you
will hear music for 3 seconds;
• when the music ends, enter the
remote control/unlock password
(if unchanged, it is 1 2 3 4);
wait for the Start dialing tone
• enter the required command.
This service must be previously configured on any external
telephone line (see Installation manual)
or
Access procedure from external line
Summary of Contents for 335828
