18
Telephone functions
1
Storing an international number in the
directory
In order to enter a telephone number with an international
area code in the directory, it is necessary to enter pauses
between the area code and the telephone number by using
the
R
key.
Pressing the
R
key will correspond to a pause of about 2
seconds.
3 6
0 7
R R
1
Pick up the handset;
2
dial
36
;
3
dial your personal password
(if unchanged, it is
1 2 3 4
);
wait for the Start dialing tone;
4
dial the short number associated with
the telephone number (from 01 to 50)
e.g.:
07;
5
dial the international area code number
e.g.
0033;
6
enter two pauses by pressing the
R
key
twice;
7
dial the telephone number to be stored;
wait for the Confirm tone within 6
seconds (approximately);
8
after you hear the Confirm tone, it will
be possible to enter another number
in the directory (thus restarting the
sequence from point 5) or hang up to
end programming.
Summary of Contents for 335828
