Brunswick StringPin, Service Manual

Page: 55 / 126

Section 3: Pinsetter Electronics
3-15
• Diagnostics - While in this mode the pinsetter will run a continuous cycle until the user
exits the mode or a pinsetter error condition occurs. During operation, the pinsetter spots
and retracts each individual pin in sequence.
• Ball Return Only - Turns on the ball return for diagnosis and adjustment of the ball
accelerator and ball lift.
• Lane Cleaning - Raises and keeps the pins in the up position by engaging the PMI string
brake so that the operator can run the lane machine to clean and condition the lane surface.
When this option is selected, the pinsetter lifts all 10 pins to up position and raises the gate.
• Setup - Mode used to set up and adjust the StringPin pinsetter. When this option is
selected, the pinsetter lifts all 10 pins to the up position so that the string wagon can stop
on the stop dogs. Normally this is used when performing the string tension adjustment.
• Pinlight On - When selected, this option causes the pinlight to turn “ON”. Typically this
feature is used to provide additional light for the mechanic when performing maintenance
of the pinsetter.