Brunswick StringPin, Service Manual

Page: 94 / 126

4-8
Section 4: Adjustments
STRING TENSION ADJUSTMENT
The string tension adjustment determine the amount of string that is in use during normal operation.
The adjustment is accomplished by rotating the string spool to let more (or less) string out of the spool.
NOTE: The string for the pins will stretch over time. This adjustment will have to be checked
after the string has stretched.
1. Return All Pins to the Pins Up Position
a. Place the Stop/Run switch on the Controller to the “Stop” position.
b. On the Pinsetter Mode drop down menu, select Pins Up or Setup.
Figures 4-8a and 4-8b.
c. Place the Stop/Run switch on the Controller to the “Run” position.
(1)
MODE DROP
DOWN MENU
(1)
MODE DROP
DOWN MENU
(2)
PINS UP
Figure 4-8a. Select Pins Up Mode (Versions 1.1.14 and Prior)
(1) MODE DROP DOWN MENU (2) PINS UP
(1)
MODE DROP
DOWN MENU
(1)
MODE DROP
DOWN MENU
(2)
SETUP
Figure 4-8b. Select Pins Up Mode (Versions 1.1.15 and Later)
(1) MODE DROP DOWN MENU (2) SETUP
NOTE: The string wagon should stop on the stop dogs so that the pins are held in the up
position. If the wagon does not catch on the stop dogs, verify the Pins Up adjustment