Bruker QUANTAX EDS, User Manual, Page: 107 / 119

5.19 Map Processing QUANTAX EDS
107
8 Select the Chart tab to see element
correlations or element histogram.
Choose Color settings , Mode and displayed
Elements in the
Chart settings
below the
Chart diagram. Make sure to have good count
statistics in the map.
9
Use the workspace icon to
a) Save Map data Use file format*:
.
bcf:
to save HyperMaps (datacube,
hyperspectral data set). Spectra for each pixel
are saved. Later offline (re-) processing is only
possible when data is saved as a .bcf file.
.
rtm: To save element distribution images
without point spectra.
. raw: To save hyperspectral datacube for
further processing with third party softwares
(NIST Lispix format).
b) Add data to project Note: Only the EM image, composite
element images and Map spectrum will be
added to a
Project
and
Report
, not the whole
hyperspectral database (HyperMap).
c) Add data to report.
10
a) Use the chart icon in the Map
tab to Save the map image (Element
selection, Settings, Result table)
Use image file formats (.bmp, .png, .jpg, .tif)
to save composite element image.
Alternatively, click with the right mouse
button into the map. The options
Add to
project and Add to report are also available.
b) Use the chart icon in the Charts
tab to Save the charts image
The options Add to project and Add to
report are also available.
c) Use the chart icon in the
Spectrum tab to Save the spectrum.
Alternatively, click with the right mouse
button into the spectrum. The options Add to
project and Add to report are also available.
11
Use the thumbnail bar icon to
a) Save images Individual element images of selected
thumbnails will be saved. To select them
mark the individual element images with left
mouse-click + SHIFT or CRTL key.
b) Add images to project Composite and individual element images will
be added to
Project .
c) Add images to report. Individual element images will be added to
Report . Alternatively, click with the right
mouse button into the thumbnail bar.
*optional, licence-based