Bruker CounterTop XRF User Manual Download Page 17

Page: 17 / 67

S1 TITAN, T

RACER

5, and CTX User Manual

030.0112.04.0

17 of 67

1.5.

Power Sources

What is
provided

The analyzer is supplied with –



Two Lithium ion (Li-ion) batteries, part number 160.0009 for S1 TITAN and T

RACER

5 and

160.0145.01 for CTX.



Battery charger with a cord, part number 160.0010. (Do not use a different charger with
these batteries.) For more information, consult the manufacturer’s battery charger
manual.

S1 TITAN
battery
removal

To remove a battery from the S1 TITAN

, while pressing the base, lift up the locking clip and pull

down the door. Pull out the battery.

RACER

battery
removal

To remove a battery from the T

RACER

, press the battery door button, open the door, and pull

out the battery.

Button

Battery
installation for
handheld

To install a battery into an instrument

, slide in the battery and close the door until the locking

clip clicks. Note that the battery can be inserted completely in only one orientation.

Your Complete Source for

Testing Equipment

www.BergEng.com

Berg Engineering & Sales Company, Inc.

1-847-577-3980

[email protected]

Summary of Contents for CounterTop XRF




































































Search results

Summary of Contents for CounterTop XRF

Reviews:

Related manuals for CounterTop XRF

Brands by name

Popular brands

Bruker CounterTop XRF, User Manual

Search results

Summary of Contents for CounterTop XRF

Reviews:

Related manuals for CounterTop XRF

Brands by name

Popular brands