Bruker CounterTop XRF User Manual Download Page 11

Page: 11 / 67

S1 TITAN, T

RACER

5, and CTX User Manual

030.0112.04.0

11 of 67

Installing a
collimator

To install an alternate collimator –

Step

Action

Ensure that the instrument is powered off.

Using the provided 0.050 inch hex
screwdriver, open the collimator hatch located
on the side of the instrument nose. Do not
allow debris to get inside the hatch area.

Using a thumbnail on the lip of the currently
installed collimator, slide it out. It may be
tight.

Line up the new collimator with the groove
inside the hatch and slide it in until it clicks.
Again, do not allow debris inside.

Securely close the hatch and screw it shut.

Your Complete Source for

Testing Equipment

www.BergEng.com

Berg Engineering & Sales Company, Inc.

1-847-577-3980

[email protected]

Summary of Contents for CounterTop XRF




































































Search results

Summary of Contents for CounterTop XRF

Reviews:

Related manuals for CounterTop XRF

Brands by name

Popular brands

Bruker CounterTop XRF, User Manual

Search results

Summary of Contents for CounterTop XRF

Reviews:

Related manuals for CounterTop XRF

Brands by name

Popular brands